48W Launi Daidaitacce kuma Hasken Dimmable LED Rufe Panel Haske 60 × 60

2.4G CCT Dimming LED Panel Light kamar yadda kasuwancin ya jagoranci hasken wutar lantarki yana ɗaukar ingantaccen LED mai haske azaman tushen haske, wanda yake barga, tsawon rayuwa kuma babu fitar da UV & IR.Gidan da aka ƙera na musamman na aluminum yana da salo kuma mai salo tare da kyakkyawan sarrafa zafi.Tare da CCT Dimming LED Panel Lights, mai amfani na ƙarshe yana jin daɗin ƙwarewar hasken wutar lantarki na CCT, wanda zai iya daidaita tsarin mu na hasken rana.

Abu:600x600 CCT Dimmable LED Panel Light

Ƙarfi:40W / 48W / 60W

Mai Ragewa:CCT Daidaitacce da Haske mai Dimmable

Zazzabi Launi:Zazzagewa daga 3000K zuwa 6500K

Tsawon Rayuwa:≥50000 hours

Aika mana imel Zazzage azaman PDF

Rukunin samfuran

Cikakken Bayani

Jagoran Shigarwa

Harshen samfur

Bidiyon samfur

1. SamfuraSiffofinof600x600 CCT DimmableLEDPanelHasket.

• 2.4G CCT Dimming LED Panel Light kamar yadda kasuwancin ya jagoranci hasken wutar lantarki yana ɗaukar ƙwararrun LED mai haske a matsayin tushen haske, wanda yake barga, tsawon rayuwa kuma babu fitar da UV & IR.Gidan da aka ƙera na musamman na aluminum yana da salo kuma mai salo tare da kyakkyawan sarrafa zafi.Tare da CCT Dimming LED Panel Lights, mai amfani na ƙarshe yana jin daɗin ƙwarewar hasken wutar lantarki na CCT, wanda zai iya daidaita tsarin mu na hasken rana.

• CCT dimmable LED panel haske yana ɗaukar bayani na yau da kullun don daidaita "launi" na farin haske daga 3000k zuwa 6500k kuma a halin yanzu tare da aikin rage haske.Yana iya aiki a lokaci guda tare da kowane adadin sauran fale-falen haske tare da ikon nesa na RF guda ɗaya, kuma tasiri mai tasiri har zuwa mita 20.Mara-mataki daidaitawa mataki 4 da sauri daidaita flicker kyauta.

• Domin CCT LED lebur panel haske, akwai 595x595mm, 295x595mm, 595x1195mm, 620x620, 295x295mm,295x1195mm don zažužžukan.

• Za mu iya samar da garanti na shekaru 3 don hasken wutar lantarki na CCT daidaitacce.

2. Takaddun Samfura:

Model No	Saukewa: PL-6060-40W-CCT	Saukewa: PL-6262-40W-CCT	Saukewa: PL-3060-36W-CCT
Amfanin Wuta	40W/48W/60W/	40W	36W
Girma (mm)	59559510mm	62062010mm	59529510mm
Nau'in LED	Saukewa: SMD2835
Yanayin Launi (K)	Dimmable daga 3000K zuwa 6500K
Launi	Farin Dumi/Farin Halitta/ Fari mai Tsafta
Ƙaƙwalwar Ƙaƙwalwa (digiri)	>120°
Ingantaccen Haske (lm/w)	>90lm/w
CRI	>80
Direban LED	Direban IC na yanzu
Factor Power	> 0.9
Input Voltage	AC 85V - 265V, 50 - 60Hz
Muhallin Aiki	Cikin gida
Kayan Jiki	Aluminum Frame + Mitsubishi LGP + PS Diffuser
IP Rating	IP20
Yanayin Aiki	-20 ~ 65°
Dimmable Way	Zazzabi mai launi da haske mai dimmable
Zabin Shigarwa	Rufaffiyar Rufe / An dakatar da shi / Sama / Dutsen bango
Tsawon rayuwa	50,000 hours
Garanti	Shekaru 3

3.LED Panel Hotunan Haske:

CCT Dimmable Controller:

1. A cikin dakika 3 bayan fitilar ta kunna, danna maɓallin lamba "1", sannan danna maɓallin "ID", sannan danna maɓallin "1" kuma sake danna maɓallin "ID" a matsayin farko.Idan lambar ta daidaita cikin nasara, to hasken zai haskaka lokaci ɗaya;

2. Idan kana son saita fitulun haske na biyu ko na biyu, zaku iya danna maɓallin lamba "2", sannan danna maɓallin "ID", sannan danna maɓallin lamba "2" kuma sake danna maɓallin "ID" kamar haka.Wannan shine don saita lambar rukuni don fitilun panel daidai;

3.Lokacin da kake son sarrafa lambar "1" haske ko lambar "1" fitilun rukuni, kawai danna maɓallin "1" don daidaita yanayin haske ko launi;

CCT Mai Rarraba bangon Mai Ragewa:

Kunnawa/Kashe, Ragewa da daidaita yanayin zafi.Ana iya shigar da wannan mai sarrafa panel a bango.na iya saita ƙungiyoyi 6 sun jagoranci hasken panel, kuma kowace ƙungiya ba ta da iyaka ga yawan hasken panel.

Sensor Hasken yanayi:

Daidaita hasken fitilar ta atomatik bisa ga hasken yanayi.Ƙungiyar 1 Sarrafa, babu iyaka ga adadin fitilu a cikin rukuni a cikin nisa mai tasiri.aikin gano sauti na firikwensin na zaɓi ne.Lokacin da akwai sauti, firikwensin zai daidaita fitilar ko zai kashe fitilar.

5. Lightman Ambient Light Sensor don CCT Dimmalbe Panel Light

6. Launi Zazzabi Daidaitacce LED Panel Haske daga Lightman

4. Aikace-aikace:

Lightman LED Panel Light ana amfani dashi sosai don hasken cikin gida.Irin su, Ofis, Asibiti, Resistant, Supermarket da hasken kayan abinci da sauransu.

Recessed Installation Project:

Aikin Shigar da Sama:

Aikin Dake Dakatarwa:

11. An dakatar da 60x60 led flat panel haske a ofis

Aikin Shigar da bango:

Na baya: Direban Osram 18W 30 30 2.4G Dimmable LED Flat Panel Light

Na gaba: 3000K-6500K Mai Canjin launi 40W 62 × 62 CCT LED Panel Light Fixture

Jagoran Shigarwa:

Don hasken wutar lantarki, akwai rufin rufin rufin, wanda aka ɗora sama, dakatarwar shigarwa, ɗora bango da dai sauransu hanyoyin shigarwa don zaɓuɓɓuka tare da na'urorin shigarwa daidai.Abokin ciniki zai iya zaɓar bisa ga buƙatun su.

Kit ɗin dakatarwa:

Kit ɗin dutsen da aka dakatar don panel LED yana ba da damar dakatar da bangarori don kyan gani ko inda babu rufin grid na gargajiya na T-bar yanzu.

Abubuwan da aka haɗa a cikin Kit ɗin Dutsen da aka dakatar:

Abubuwa	Farashin PL-SCK4				Farashin PL-SCK6
	3030	3060	6060	6262	3012	6012
	X 2				X 3
	X 2				X 3
	X 2				X 3
	X 2				X 3
	X 4				X 6

Surface Dutsen Frame Kit:

Wannan firam ɗin dutsen saman ya dace don shigar da fitilun panel na Lightman LED a wurare ba tare da dakatar da grid na rufi ba, kamar plasterboard ko simintin siminti.Yana da kyau ga ofisoshi, makarantu, asibitoci da sauransu inda ba zai yiwu ba.

Da farko dunƙule bangarorin firam uku zuwa rufin.Daga nan sai a zame panel ɗin LED. A ƙarshe kammala shigarwa ta hanyar murɗa sauran gefen.

Firam ɗin ɗorewa yana da isasshen zurfin da za a iya saukar da direban LED, wanda ya kamata a sanya shi a tsakiyar rukunin don samun ɓarkewar zafi mai kyau.

Abubuwan da aka haɗa a cikin Kit ɗin Dutsen Dutsen Surface:

Abubuwa	Saukewa: PL-SMK3030	Saukewa: PL-SMK6030	Saukewa: PL-SMK6060	Saukewa: PL-SMK6262	Saukewa: PL-SMK1230	Saukewa: PL-SMK1260
Girman Girma	302 x 305 x 50 mm	302 x 605 x 50 mm	602x605x50 mm	622x625x50mm	1202x305x50mm	1202x605x50mm
Frame A	L302 mm x 2 guda	L302mm x 2 guda	L602 mm x 2 guda	L622mm x 2 guda	L1202mm x 2 guda	L1202 mm x 2 guda
Tsarin B	L305 mm x 2 guda	L305 mm x 2 guda	L605mm x 2 guda	L625 mm x 2 guda	L305mm x 2 guda	L605mm x 2 guda
	x8 guda
	x 4 guda			x6 guda

Rufin Dutsen Kit:

An tsara kayan hawan rufi na musamman, ɗayan hanyar shigar SGSlight TLP LED panel fitilu a wurare ba tare da dakatar da grid na rufi ba, kamar plasterboard ko simintin rufi ko bango.Yana da kyau ga ofisoshi, makarantu, asibitoci da sauransu inda ba zai yiwu ba.

Da farko dunƙule shirye-shiryen bidiyo zuwa rufi / bango, da kuma daidai shirye-shiryen bidiyo zuwa LED panel.Sannan a haɗa shirye-shiryen bidiyo.A ƙarshe kammala shigarwa ta hanyar sanya direban LED a baya na LED panel.

Abubuwan da ke cikin Rufin Dutsen Kits:

Abubuwa	Saukewa: PL-SMC4				PL-SMC6
	3030	3060	6060	6262	3012	6012
	X 4				X 6
	X 4				X 6
	X 4				X 6
	X 4				X 6
	X 4				X 6
	X 4				X 6
	X 4				X 6

Shirye-shiryen bazara:

Ana amfani da shirye-shiryen bazara don shigar da panel na LED a cikin rufin plasterboard tare da yanke rami.Yana da kyau ga ofisoshi, makarantu, asibitoci da sauransu inda ba zai yiwu ba.

Da farko dunƙule shirye-shiryen bazara zuwa panel LED.Ana shigar da panel na LED a cikin ramin da aka yanke na rufi.A ƙarshe kammala shigarwa ta hanyar daidaita matsayi na LED panel kuma tabbatar da shigarwa yana da ƙarfi da aminci.

Abubuwan sun haɗa da: