Fitilar LED mai haske mai haske 300 × 300 RGB mai rufewa 30x30cm Hoton da aka nuna

Fitilar Panel ta RGB LED mara waya 300 × 300 30x30cm

Fitilar RGB mai haske mai launuka iri-iri, wacce ta dace da KTV, otal, ɗakin rawa da sauran wuraren nishaɗi da wuraren jama'a, hasken kayan ado, launuka iri-iri masu canza launi, don samar da ƙarin jin daɗin gani. Haskenmu yana da wurare da yawa, yana ba masu amfani da mafi kyawun ƙwarewar yanayi da kuma kyakkyawan yanayin haske. Haskaka kyakkyawar rayuwa da launin hikima!

Abu:Hasken Panel na LED 300x300 RGB

Ƙarfi:18W

Wutar Lantarki Mai Aiki:DC12V / DC24V

Mai rage nauyi:Mai iya rage RGB mai canza launi

Tsawon rayuwa:≥Awanni 50000

Aika mana imel Sauke shi azaman PDF

Nau'ikan samfura

Cikakken Bayani game da Samfurin

Jagorar Shigarwa

Shari'ar Aiki

Bidiyon Samfuri

1.Gabatarwar SamfurinRGB 30x30LEDPanelHaske18w.

• Wannan allon hasken RGB LED mai sassauƙa ya dace da hasken kabad, hasken KTV, hasken dandamali, hasken kicin, hasken aiki, hasken nunin faifai, hasken kabad, ko don wasu aikace-aikacen cikin gida. Yana amfani da launuka har miliyan 16. Ƙarfin fitarwa na hasken RGB square panel shine DC12V ko 24V kuma ana iya amfani da shi tare da kowane mai sarrafa RGB na duniya don zaɓuɓɓukan canza launi.

• An ƙera fitilar LED mai faɗi mai haske ta RGB don rage amfani da makamashi da kuma shimfidar wuri. Mai sauƙin shigarwa da kulawa. Ana iya amfani da ita don maye gurbin fitilun gargajiya, kamar fitila mai haske, fitilu masu rage kuzari, fitilun saukar da haske, da sauransu. Musamman ma ana amfani da ita ga KTV, manyan kantuna, manyan kantuna, gidaje, gidan wasan kwaikwayo, dandamali da otal-otal da sauransu.

• Hasken Flat Panel na Lightman RGB LED ya wuce takaddun shaida na CE TUV ROHS da sauransu.

2. Sigar Samfura:

Lambar Samfura	PL-60120-48W-RGB	PL-3060-18W-RGB	PL-3030-18W-RGB
Amfani da Wutar Lantarki	48W	18W	18W
Girma (mm)	595119511mm	29559511mm	29529511mm
Yawan LED (inji)	Kwamfuta 182	Kwamfuta 84	Kwamfuta 84
Nau'in LED	SMD5050
Launi	Launuka da yawa
Kusurwar haske (digiri)	>120°
CRI	>80
Direban LED	Direban LED mai ƙarfin lantarki mai ɗorewa
Wutar Lantarki ta Fitarwa	DC12 / 24V
Voltage na Shigarwa	AC 85V - 265V, 50 - 60Hz
Muhalli na Aiki	Cikin Gida
Kayan Jiki	Firam ɗin ƙarfe na aluminum da PS Diffuser
Matsayin IP	IP20
Zafin Aiki	-25°~70°
Hanya Mai Rage ...	Rage RGB
Zaɓin Shigarwa	An saka saman/An dakatar/An saka shi a ciki
Tsawon rayuwa	awanni 50,000
Garanti	Shekaru 3

Hotunan Hasken Panel na LED:

1. Hasken LED mai nuna haske ja mai haske na Lightman RGB

2. Hasken LED mai nuna kore a Lightman RGB

3.Lightman RGB LED Panel Mai Nuna Haske Shuɗi

4. launuka daban-daban na hasken panel na LED 60x60

Mai Kula da Na'urar Nesa ta RGB 2.4Ghz:

• Tsarin sarrafawa mai sauƙin amfani.

• Yi amfani da tsarin sarrafa RGB na 2.4G Hz, ikon hana tsangwama.

•Ba tare da tsangwama tsakanin masu sarrafawa ba.

•Zai iya daidaita haske da launuka a lokaci guda.

• Nau'ikan nau'ikan walƙiya iri-iri guda 20 da ake da su.

• Nisa tsakanin na'urorin sarrafawa ta mara waya zai iya kaiwa mita 25-30.

• Faifan taɓawa na Nesa na Mai Kula da RF mara waya don RGB.

6. Zane-zanen Wayoyin Wutar Lantarki na DC24V RGB LED

7. Hasken RGB LED Panel a ƙarƙashin gwaji-2

4. Aikace-aikacen Hasken Panel na LED:

An ƙera fitilar RGB dimming led mai faɗi don rage amfani da makamashi da kuma shimfidar wuri. Mai sauƙin shigarwa da kulawa. Musamman ma don KTV, manyan kantuna, manyan kantuna, gidaje, gidan wasan kwaikwayo, dandamali da otal-otal da sauransu.

10. hasken panel mai sauƙin haske na RGB

Na baya: Farashin Jigilar kaya DC12V 18W RGB LED Panel Light 60×30 Don Hasken KTV

Na gaba: Hasken LED na Amazon Echo ZigBee mai canza launi 600×600

Jagorar Shigarwa:

Ga hasken panel ɗin LED, akwai hanyoyin shigarwa na rufin da aka rufe, an ɗora saman, an ɗora shi a bango da sauransu don zaɓuɓɓuka tare da kayan haɗin shigarwa masu dacewa. Abokin ciniki zai iya zaɓar gwargwadon buƙatunsa.

Kayan Dakatarwa:

Kayan da aka dakatar da shi don allon LED yana ba da damar dakatar da bangarori don yin kyan gani ko kuma inda babu rufin grid na gargajiya na T-bar.

Abubuwan da aka haɗa a cikin Kayan Dutsen da aka Dakatar:

Abubuwa	PL-SCK4				PL-SCK6
	3030	3060	6060	6262	3012	6012
	X 2				X 3
	X 2				X 3
	X 2				X 3
	X 2				X 3
	X 4				X 6

Kit ɗin Sanya Tsarin Sama:

Wannan firam ɗin da aka ɗora a saman bene ya dace don shigar da fitilun panel na Lightman LED a wurare marasa layin rufin da aka dakatar, kamar allon plasterboard ko rufin siminti. Ya dace da ofisoshi, makarantu, asibitoci da sauransu inda ba zai yiwu a ɗora katako a cikin ɗaki ba.

Da farko a haɗa ɓangarorin firam guda uku a kan rufin. Sannan a saka allon LED a ciki. A ƙarshe a kammala shigarwa ta hanyar murƙushe sauran ɓangaren.

Tsarin saman yana da zurfin da zai iya ɗaukar direban LED, wanda ya kamata a sanya shi a tsakiyar allon don samun kyakkyawan watsawar zafi.

Abubuwan da aka haɗa a cikin Kit ɗin Tsarin Dutsen Surface:

Abubuwa	PL-SMK3030	PL-SMK6030	PL-SMK6060	PL-SMK6262	PL-SMK1230	PL-SMK1260
Girman Firam	302x305x50 mm	302x605x50 mm	602x605x50 mm	622x625x50mm	1202x305x50mm	1202x605x50mm
Firam A	L302 mm Kwamfuta 2 X	L302mm Kwamfuta 2 X	L602 mm Kwamfuta 2 X	L622mm Kwamfuta 2 X	L1202mm Kwamfuta 2 X	L1202 mm Kwamfuta 2 X
Tsarin B	L305 mm Kwamfuta 2 X	L305 mm Kwamfuta 2 X	L605mm Kwamfuta 2 X	L625 mm Kwamfuta 2 X	L305mm Kwamfuta 2 X	L605mm Kwamfuta 2 X
	Kwamfutoci 8 X
	X guda 4			Kwamfutoci 6 X

Kit ɗin Sanya Rufi:

An tsara kayan ɗaura rufin musamman, wata hanyar kuma ita ce a sanya fitilun panel na SGSLight TLP na LED a wurare marasa layin rufin da aka dakatar, kamar allon plasterboard ko rufin siminti ko bango. Ya dace da ofisoshi, makarantu, asibitoci da sauransu inda ba zai yiwu a ɗora rufin ba.

Da farko a haɗa maƙullan a kan silin/bango, sannan a haɗa maƙullan a kan allon LED. A ƙarshe a kammala shigarwa ta hanyar sanya direban LED a bayan allon LED.

Abubuwan da aka haɗa a cikin Kit ɗin Dutsen Rufi:

Abubuwa	PL-SMC4				PL-SMC6
	3030	3060	6060	6262	3012	6012
	X 4				X 6
	X 4				X 6
	X 4				X 6
	X 4				X 6
	X 4				X 6
	X 4				X 6
	X 4				X 6

Shirye-shiryen bazara:

Ana amfani da maƙullan maɓuɓɓugar ruwa don sanya allon LED a cikin rufin plasterboard mai ramin da aka yanke. Ya dace da ofisoshi, makarantu, asibitoci da sauransu inda ba zai yiwu a saka shi a cikin ɗaki ba.

Da farko a haɗa maƙallan maɓuɓɓugar ruwa zuwa allon LED. Sannan a saka allon LED a cikin ramin da aka yanke a rufin. A ƙarshe a kammala shigarwa ta hanyar daidaita matsayin allon LED ɗin kuma a tabbatar da cewa shigarwar ta yi ƙarfi kuma ta yi aminci.

Abubuwan da aka haɗa: