Hasken Faifan LED UGR19 mai hana haske 60×60 36W 40W 48W

Hasken walƙiya na iya sa yanayin aiki ya zama mara daɗi kuma ya rage yawan aiki. Faifan LED ɗinmu na UGR19 da aka gina da wannan a zuciya sun dace da saitunan ofis da sauran wurare inda hasken zai iya zama matsala. Idan aka zo da yanayin zafi daban-daban, za ku iya cimma sakamakon hasken da kuke so ba tare da damuwa da hasken ba tare da waɗannan faifan LED ɗin.

Abu:Hasken Faifan Faifan LED na 600x600 UGR19

Ƙarfi:36W / 40W / 48W / 54W / 60W / 72W / 80W

Wutar Lantarki ta Shigarwa:AC85~265V, 50-60Hz

Zafin Launi:Fari Mai Dumi, Fari Mai Na Halitta, Fari Mai Sanyi

Tsawon rayuwa:≥Awanni 50000

Aika mana imel Sauke shi azaman PDF

Nau'ikan samfura

Cikakken Bayani game da Samfurin

Jagorar Shigarwa

Shari'ar Aiki

Bidiyon Samfuri

1.Gabatarwar Samfurin595x595 UGR <19LEDPanelHaske.

• Tsarin zamani mai siriri sosai. Faifan hasken rufi na UGR19 mai haske yana amfani da LEDs masu haske SMD2835 masu haske

a matsayin tushen haske.

• Babban CRI, maido da kyawun gaske. Zaɓin da ya dace don aikace-aikacen dillalai, ji daɗin nishaɗin haske.

• Ƙarin girma dabam-dabam don zaɓuɓɓukan hasken UGR <19 na allon jagora: 300*300 (295x295mm), 600*300 (595x295mm), 600*600 (595x595mm), 600*1200 (595x1195mm), 300*1200 (295x1195mm), 620*620(620x620mm).

• Yana da sauƙin shigarwa, a cikin ɗaki, a rataye ko a ɗora a saman. Yana da tsawon rai na awanni 50000.

Kuma ana iya rage hasken fitilar LED ta UGR <19 ta hanyar na'urar sarrafawa ta nesa.

• Otal, ɗakin taro, masana'anta ko ofis, amfani da kasuwanci, wurin zama ko wuraren jama'a, makaranta, asibiti, wurin adana makamashi & babban CRI, UGR <19 LED Panel Yana haskaka yanayin hasken gargajiya, yana nuna launin fata mai kauri, zaɓi na farko don ofis, fitilar gida.

• Ƙarin zaɓuɓɓuka don rage haske da firikwensin-ZigBee, Dali, PWM, 0/1-10V, firikwensin micro-wave, firikwensin haske da sauransu.

2. Sigar Samfura:

Lambar Samfura	PL-6060-36W-UGR	PL-6060-40W-UGR	PL-6060-48W-UGR	PL-6060-54W-UGR
Amfani da Wutar Lantarki	36W	40W	48W	54W
Hasken Haske (Lm)	3240～3600lm	3600～4000lm	4320～4800lm	4860～5400lm
Yawan LED (inji)	Guda 192	Kwamfuta 204	Kwamfuta 252	Kwamfuta 280
Nau'in LED	SMD 2835
Zafin Launi (K)	2800 – 6500K
Launi	Fari Mai Dumi/Na Halitta/Mai Sanyi
Girma	595x595x11mm
Kusurwar haske (digiri)	90°
Ingancin Haske (lm/w)	>90lm/w
CRI	>80
Ma'aunin Ƙarfi	>0.95
Voltage na Shigarwa	AC 85V - 265V
Mita Mai Sauri (Hz)	50 - 60Hz
Muhalli na Aiki	Cikin Gida
Kayan Jiki	Tsarin ƙarfe na aluminum da kuma mai watsawa na Prismatic
Matsayin IP	IP20
Zafin Aiki	-20°~65°
Mai iya ragewa	Zaɓi
Tsawon rayuwa	awanni 50,000
Garanti	Shekaru 3 ko Shekaru 5

Hotunan Hasken Panel na LED:

3. Micro Prismatic Diffuser VS Norma PS Diffuser

4. Hasken Panel na LED na UGR19 VS na Al'ada

6. Rahoton Gwajin Photometric na Hasken Hasken UGR19 mai jagoranci

4. Aikace-aikacen Hasken Panel na LED:

Ana amfani da hasken Sky Panel LED mara Frameless sosai a ofisoshi, asibiti, ɗakin kwana, babban kanti, makarantu, masana'antu, wurin motsa jiki, otal, birnin anime da sauransu.

Aikin Shigarwa da Aka Sanya a Bango:

11. Hasken panel na ugr16 da aka sanya a bango

Aikin Shigarwa Mai Rufewa:

8. Hasken Panel na LED na UR19 mai girman 600x600mm a Ofis

Aikin Shigarwa da Aka Dakatar:

10. hasken panel mai jagora mai dakatarwa 30x120

Aikin Shigarwa da Aka Sanya a Sama:

9. Hasken panel na LED da aka ɗora a saman ugr19

Na baya: Fitilar Curewar UVC Mai Ɗauki ta Asibitin Factory tare da Fitilar UV Ozone Ultraviolet Germicidal

Na gaba: CRI90 62×62 UGR mai hana haskeHasken Faifan LED mai faɗi 620*620 36W 40W

Jagorar Shigarwa:

Ga hasken panel ɗin LED, akwai hanyoyin shigarwa na rufin da aka rufe, an ɗora saman, an ɗora shi a bango da sauransu don zaɓuɓɓuka tare da kayan haɗin shigarwa masu dacewa. Abokin ciniki zai iya zaɓar gwargwadon buƙatunsa.

Kayan Dakatarwa:

Kayan da aka dakatar da shi don allon LED yana ba da damar dakatar da bangarori don yin kyan gani ko kuma inda babu rufin grid na gargajiya na T-bar.

Abubuwan da aka haɗa a cikin Kayan Dutsen da aka Dakatar:

Abubuwa	PL-SCK4				PL-SCK6
	3030	3060	6060	6262	3012	6012
	X 2				X 3
	X 2				X 3
	X 2				X 3
	X 2				X 3
	X 4				X 6

Kit ɗin Sanya Tsarin Sama:

Wannan firam ɗin da aka ɗora a saman bene ya dace don shigar da fitilun panel na Lightman LED a wurare marasa layin rufin da aka dakatar, kamar allon plasterboard ko rufin siminti. Ya dace da ofisoshi, makarantu, asibitoci da sauransu inda ba zai yiwu a ɗora katako a cikin ɗaki ba.

Da farko a haɗa ɓangarorin firam guda uku a kan rufin. Sannan a saka allon LED a ciki. A ƙarshe a kammala shigarwa ta hanyar murƙushe sauran ɓangaren.

Tsarin saman yana da zurfin da zai iya ɗaukar direban LED, wanda ya kamata a sanya shi a tsakiyar allon don samun kyakkyawan watsawar zafi.

Abubuwan da aka haɗa a cikin Kit ɗin Tsarin Dutsen Surface:

Abubuwa	PL-SMK3030	PL-SMK6030	PL-SMK6060	PL-SMK6262	PL-SMK1230	PL-SMK1260
Girman Firam	302x305x50 mm	302x605x50 mm	602x605x50 mm	622x625x50mm	1202x305x50mm	1202x605x50mm
Firam A	L302 mm Kwamfuta 2 X	L302mm Kwamfuta 2 X	L602 mm Kwamfuta 2 X	L622mm Kwamfuta 2 X	L1202mm Kwamfuta 2 X	L1202 mm Kwamfuta 2 X
Tsarin B	L305 mm Kwamfuta 2 X	L305 mm Kwamfuta 2 X	L605mm Kwamfuta 2 X	L625 mm Kwamfuta 2 X	L305mm Kwamfuta 2 X	L605mm Kwamfuta 2 X
	Kwamfutoci 8 X
	X guda 4			Kwamfutoci 6 X

Kit ɗin Sanya Rufi:

An tsara kayan ɗaura rufin musamman, wata hanyar kuma ita ce a sanya fitilun panel na SGSLight TLP na LED a wurare marasa layin rufin da aka dakatar, kamar allon plasterboard ko rufin siminti ko bango. Ya dace da ofisoshi, makarantu, asibitoci da sauransu inda ba zai yiwu a ɗora rufin ba.

Da farko a haɗa maƙullan a kan silin/bango, sannan a haɗa maƙullan a kan allon LED. A ƙarshe a kammala shigarwa ta hanyar sanya direban LED a bayan allon LED.

Abubuwan da aka haɗa a cikin Kit ɗin Dutsen Rufi:

Abubuwa	PL-SMC4				PL-SMC6
	3030	3060	6060	6262	3012	6012
	X 4				X 6
	X 4				X 6
	X 4				X 6
	X 4				X 6
	X 4				X 6
	X 4				X 6
	X 4				X 6

Shirye-shiryen bazara:

Ana amfani da maƙullan maɓuɓɓugar ruwa don sanya allon LED a cikin rufin plasterboard mai ramin da aka yanke. Ya dace da ofisoshi, makarantu, asibitoci da sauransu inda ba zai yiwu a saka shi a cikin ɗaki ba.

Da farko a haɗa maƙallan maɓuɓɓugar ruwa zuwa allon LED. Sannan a saka allon LED a cikin ramin da aka yanke a rufin. A ƙarshe a kammala shigarwa ta hanyar daidaita matsayin allon LED ɗin kuma a tabbatar da cewa shigarwar ta yi ƙarfi kuma ta yi aminci.

Abubuwan da aka haɗa: