60W 1200×600 CCT Mai Gyaran Hasken Faifan LED Mai Rage Haske 60×120

CCT dimmable yana amfani da mafita mai gudana don daidaita 'Launi' na hasken fari daga 3000K zuwa 6500K kuma a halin yanzu tare da aikin rage haske. Zai iya sarrafawa a lokaci guda tare da kowace adadin fitilun panel na LED ta hanyar sarrafa nesa guda ɗaya na RF. Can ɗaya na nesa yana saita hasken panel na LED rukuni 99, kuma kowane rukuni ba shi da iyaka ga adadin hasken panel. Daidaitawa ba tare da mataki ba da daidaitawa cikin sauri na matakai 4 don zaɓi. Kuma ba tare da walƙiya ba. Yana tallafawa na'urar firikwensin haske zuwa rage haske ta atomatik. A halin yanzu, yana kuma tallafawa lokacin saitawa don kunnawa/kashewa.

Abu:Hasken Panel na LED mai rage haske 600x1200 CCT

Ƙarfi:60W

Mai rage nauyi:CCT Mai Daidaitawa da Haske Mai Rage Haske

Zafin Launi:Ana iya daidaita shi daga 3000K zuwa 6500K

Tsawon rayuwa:≥Awanni 50000

Aika mana imel Sauke shi azaman PDF

Nau'ikan samfura

Cikakken Bayani game da Samfurin

Jagorar Shigarwa

Shari'ar Aiki

Bidiyon Aiki

1. SamfuriSiffofiof60x120 CCT Mai Rage HaskeLEDPanelHasket.

• Hasken Faifan LED na CCT mai tsawon 60*120cm siriri ne sosai, mai sauƙi, kuma mai sassauƙa. Waɗannan halaye suna bawa masu ƙira damar ƙirƙirar siffofi masu ƙirƙira fiye da yadda hasken da ake da shi a yanzu zai iya bayarwa.

•Slim LED mai sauƙin daidaitawa da zafin launi zai iya sarrafawa a lokaci guda tare da kowace adadin fitilun panel na LED ta hanyar sarrafa nesa ɗaya kawai na RF. Kuma gwangwani ɗaya na nesa yana saita fitilun panel na rukuni 99 na LED, kuma kowane rukuni ba shi da iyaka ga adadin hasken panel.

• Lumen ɗinmu na CCT LED zai iya kaiwa 80lm/w-90lm/w, mafi kyawun CRI da za mu iya samu fiye da 90 (CRI>90), al'ada muna amfani da CRI>80.

• Ingancin sanyaya fitilarmu ya fi kyau, haske mafi girma, ingancin hasken zai iya kaiwa sama da kashi 97%

2. Bayanin Samfuri:

Lambar Samfura	PL-30120-60W-CCT	PL-60120-60W-CCT	PL-3030-25W-CCT
Amfani da Wutar Lantarki	60W	60W	25W
Hasken Haske (Lm)	4800～5400lm	4800～5400lm	2000～2250lm
Girma (mm)	295119510mm	595119510mm	29529510mm
Yawan LED (inji)	Kwamfuta 240	Kwamfuta 240	Guda 210
Nau'in LED	SMD 2835
Zafin Launi (K)	Mai rage gudu daga 3000K zuwa 6500K
Launi	Fari Mai Dumi/Fari Na Halitta/Fari Mai Tsabta
Kusurwar haske (digiri)	>120°
Ingancin Haske (lm/w)	>90lm/w
CRI	>80
Direban LED	Direban IC na Yanzu Mai Dorewa
Ma'aunin Ƙarfi	>0.9
Voltage na Shigarwa	AC 85V - 265V, 50 - 60Hz
Muhalli na Aiki	Cikin Gida
Kayan Jiki	Aluminum Frame + Mitsubishi LGP + PS Diffuser
Matsayin IP	IP20
Zafin Aiki	-20°~65°
Hanya Mai Rage ...	Zafin launi da haske mai rage haske
Zaɓin Shigarwa	Rufi Mai Rufi/ An Dakatar/ Fuskar Gida/ An Sanya a Bango
Tsawon rayuwa	awanni 50,000
Garanti	Shekaru 3

3.Hotunan Hasken LED Panel:

1. Hasken panel mai jagoranci na CCT 600x600

2. Hasken panel na LED mai sauƙin gyarawa na CCT 120x60

Mai Kula da Rage Ragewar CCT:

1. Cikin daƙiƙa 3 bayan an kunna fitilar, danna maɓallin lamba "1", sannan danna maɓallin "ID", sannan sake danna maɓallin lamba "1" sannan sake danna maɓallin "ID" a matsayin karo na farko. Idan lambar ta yi daidai da kyau, to hasken zai yi walƙiya sau ɗaya;

2. Idan kana son saita fitilun rukuni na biyu ko na biyu, za ka iya danna maɓallin lamba "2", sannan ka danna maɓallin "ID", sannan ka sake danna maɓallin lamba "2" sannan ka sake danna maɓallin "ID" kamar haka. Wannan shine don saita lambar rukuni don fitilun panel masu dacewa;

3. Lokacin da kake son sarrafa lambar haske ko lambar haske ta rukuni "1", kawai danna maɓallin lamba "1" don daidaita haske ko zafin launi;

5. kwamitin jagora mai daidaitawa na cct 60x60

4. Aikace-aikacen:

Hasken CCT LED Panel Lights ana amfani da shi sosai don hasken cikin gida. Kamar, Ofis, Asibiti, Mai Juriya, Babban Kasuwa, Otal da Kayan Abinci da sauransu.

Aikin Shigarwa Mai Rufewa:

10. kwamitin jagora mai haske mai haske na cct

Aikin Shigarwa da Aka Sanya a Sama:

Aikin Shigarwa da Aka Dakatar:

12. kwamitin jagoran CCT da aka dakatar 30x120

Aikin Shigarwa da Aka Sanya a Bango:

Na baya: Hasken Rufi Mai Canza Launi na CCT Mai Canza Hasken Rufi Mai Lantarki 300*1200

Na gaba: Babu walƙiya mai walƙiya CCT da aka dakatar Daidaitacce Mai Dimmable LED Flat Panel Light 30×60

Jagorar Shigarwa:

Ga hasken panel ɗin LED, akwai hanyoyin shigarwa na rufin da aka rufe, an ɗora saman, an ɗora shi a bango da sauransu don zaɓuɓɓuka tare da kayan haɗin shigarwa masu dacewa. Abokin ciniki zai iya zaɓar gwargwadon buƙatunsa.

Kayan Dakatarwa:

Kayan da aka dakatar da shi don allon LED yana ba da damar dakatar da bangarori don yin kyan gani ko kuma inda babu rufin grid na gargajiya na T-bar.

Abubuwan da aka haɗa a cikin Kayan Dutsen da aka Dakatar:

Abubuwa	PL-SCK4				PL-SCK6
	3030	3060	6060	6262	3012	6012
	X 2				X 3
	X 2				X 3
	X 2				X 3
	X 2				X 3
	X 4				X 6

Kit ɗin Sanya Tsarin Sama:

Wannan firam ɗin da aka ɗora a saman bene ya dace don shigar da fitilun panel na Lightman LED a wurare marasa layin rufin da aka dakatar, kamar allon plasterboard ko rufin siminti. Ya dace da ofisoshi, makarantu, asibitoci da sauransu inda ba zai yiwu a ɗora katako a cikin ɗaki ba.

Da farko a haɗa ɓangarorin firam guda uku a kan rufin. Sannan a saka allon LED a ciki. A ƙarshe a kammala shigarwa ta hanyar murƙushe sauran ɓangaren.

Tsarin saman yana da zurfin da zai iya ɗaukar direban LED, wanda ya kamata a sanya shi a tsakiyar allon don samun kyakkyawan watsawar zafi.

Abubuwan da aka haɗa a cikin Kit ɗin Tsarin Dutsen Surface:

Abubuwa	PL-SMK3030	PL-SMK6030	PL-SMK6060	PL-SMK6262	PL-SMK1230	PL-SMK1260
Girman Firam	302x305x50 mm	302x605x50 mm	602x605x50 mm	622x625x50mm	1202x305x50mm	1202x605x50mm
Firam A	L302 mm Kwamfuta 2 X	L302mm Kwamfuta 2 X	L602 mm Kwamfuta 2 X	L622mm Kwamfuta 2 X	L1202mm Kwamfuta 2 X	L1202 mm Kwamfuta 2 X
Tsarin B	L305 mm Kwamfuta 2 X	L305 mm Kwamfuta 2 X	L605mm Kwamfuta 2 X	L625 mm Kwamfuta 2 X	L305mm Kwamfuta 2 X	L605mm Kwamfuta 2 X
	Kwamfutoci 8 X
	X guda 4			Kwamfutoci 6 X

Kit ɗin Sanya Rufi:

An tsara kayan ɗaura rufin musamman, wata hanyar kuma ita ce a sanya fitilun panel na SGSLight TLP na LED a wurare marasa layin rufin da aka dakatar, kamar allon plasterboard ko rufin siminti ko bango. Ya dace da ofisoshi, makarantu, asibitoci da sauransu inda ba zai yiwu a ɗora rufin ba.

Da farko a haɗa maƙullan a kan silin/bango, sannan a haɗa maƙullan a kan allon LED. A ƙarshe a kammala shigarwa ta hanyar sanya direban LED a bayan allon LED.

Abubuwan da aka haɗa a cikin Kit ɗin Dutsen Rufi:

Abubuwa	PL-SMC4				PL-SMC6
	3030	3060	6060	6262	3012	6012
	X 4				X 6
	X 4				X 6
	X 4				X 6
	X 4				X 6
	X 4				X 6
	X 4				X 6
	X 4				X 6

Shirye-shiryen bazara:

Ana amfani da maƙullan maɓuɓɓugar ruwa don sanya allon LED a cikin rufin plasterboard mai ramin da aka yanke. Ya dace da ofisoshi, makarantu, asibitoci da sauransu inda ba zai yiwu a saka shi a cikin ɗaki ba.

Da farko a haɗa maƙallan maɓuɓɓugar ruwa zuwa allon LED. Sannan a saka allon LED a cikin ramin da aka yanke a rufin. A ƙarshe a kammala shigarwa ta hanyar daidaita matsayin allon LED ɗin kuma a tabbatar da cewa shigarwar ta yi ƙarfi kuma ta yi aminci.

Abubuwan da aka haɗa: