Hasken Rufi na Gaggawa na LED mai rage haske 600×1200 1-10V 60×120 80W

Ana amfani da faifan LED ɗinmu a shaguna, asibitoci, gine-ginen ofisoshi da ofisoshin majalisar dokoki; suna ba da haske mai kyau, suna kama da ƙwararru kuma saboda tsawon rayuwarsu, sun dace domin hakan yana nufin ba sai an canza su akai-akai ba. Ana kuma amfani da faifan LED ɗinmu wajen sake ginawa ko sabbin gine-gine saboda halayensu na adana kuzari.

Abu:Fitilar LED ta Gaggawa ta 600x1200

Ƙarfi:48W / 54W / 60W / 72W / 80W

Wutar Lantarki ta Shigarwa:AC85~265V, 50-60Hz

Zafin Launi:Fari Mai Dumi, Fari Mai Na Halitta, Fari Mai Sanyi

Tsawon rayuwa:≥Awanni 50000

Aika mana imel Sauke shi azaman PDF

Nau'ikan samfura

Cikakken Bayani game da Samfurin

Jagorar Shigarwa

Shari'ar Aiki

Bidiyon Samfuri

1.Gabatarwar SamfurinGaggawa ta 60x120LEDPanelHaske.

• Aluminum na jirgin sama 6063, mai yawan amfani da wutar lantarki; tare da aluminum mai kauri mm 3, wanda zai iya magance fitar da zafi na hasken panel na LED.

• Farantin Jagorar Haske (LGP): Mai haske mai tsayi 3mm (kimanin kashi 90%) na PMMA LGP, wanda ke tabbatar da cewa na LGP ba zai yi launin rawaya cikin shekaru 3 ba.

• PCB (Allon Da'ira Mai Bugawa): An shigo da shi daga Taiwan Epistar, ƙirar da'ira ta ƙwararru, kowace ƙungiyar LEDs tana aiki daban don guje wa duk wata matsala ta fitowar haske da LED mara kyau ya haifar.

• Direban LED: Direban inganci & Babu Direban Flicker.

• Jerin na'urorin hasken wutar lantarki na gaggawa nau'in kallo ne kai tsaye tare da ƙirar mallaka don lokacin gaggawa. Ana amfani da shi sosai a gida, otal, asibiti, babban kanti, ofis, dakunan aji da kuma ɗakunan taro.

• Faifan haske mai faɗi na gaggawa yana da garanti na shekaru 3 ko shekaru 5.

• Ana iya samun fitilun lantarki na gaggawa ta hanyar amfani da na'urorin rage zafi na 0-10v, masu rage zafi na Triac, masu rage zafi na Dali, masu canza launi da sauransu.

2. Sigar Samfura:

Lambar Samfura	PL-60120-48W	PL-60120-54W	PL-60120-60W
Amfani da Wutar Lantarki	48W	54W	60 W
Hasken Haske (Lm)	4320～4560lm	4860～5130lm	5400～5700lm
Yawan LED (inji)	Kwamfuta 252	Kwamfuta 280	Kwamfuta 300
Nau'in LED	SMD 2835
Lokacin Gaggawa	Awa 1, Awa 2, Awa 3 don zaɓuɓɓuka
Zafin Launi (K)	3000-6500K
Launi	Fari Mai Dumi/Na Halitta/Mai Sanyi
Girma	595119511mm
Kusurwar haske (digiri)	120°
Ingancin Haske (lm/w)	>85lm/w
CRI	>80
Ma'aunin Ƙarfi	>0.95
Voltage na Shigarwa	AC 85V - 265V
Mita Mai Sauri (Hz)	50 - 60Hz
Muhalli na Aiki	Cikin Gida
Kayan Jiki	Firam ɗin ƙarfe na aluminum da mai watsa PS
Matsayin IP	IP20
Zafin Aiki	-20°~65°
Mai iya ragewa	Zaɓi
Tsawon rayuwa	awanni 50,000
Garanti	Shekaru 3 ko Shekaru 5

Hotunan Hasken Panel na LED:

2. Hasken allo na gaggawa na ƙafa 2 x ƙafa 4

3. Hasken faifan leda mai lebur mai haske na Lightman 1200x600mm

4. Haɗin Wayoyi na Gaggawa don hasken panel na LED

5. gwajin hasken lebur mai jagoranci na gaggawa

4. Aikace-aikacen Hasken Panel na LED:

Ana amfani da hasken Sky Panel LED mara Frameless sosai a ofisoshi, asibiti, ɗakin kwana, babban kanti, makarantu, masana'antu, wurin motsa jiki, otal, birnin anime da sauransu.

Aikin Shigarwa da Aka Sanya a Bango:

11. Hasken panel na ugr16 da aka sanya a bango

Aikin Shigarwa Mai Rufewa:

Aikin Shigarwa da Aka Dakatar:

9. kwamitin gaggawa mai cike da rudani 2x4

Aikin Shigarwa da Aka Sanya a Sama:

11. kwamitin gaggawa da aka dakatar 595x1195

Na baya: 48W 72W 30×120 IP65 Hasken Faifan Layin Gaggawa na LED 1200×300

Na gaba: IP44 Awa 1 Awa 2 Awa 2 Lokacin Gaggawa 295×295 Fitilar LED Mai Rage Haske Mai Sauƙi

Jagorar Shigarwa:

Ga hasken panel ɗin LED, akwai hanyoyin shigarwa na rufin da aka rufe, an ɗora saman, an ɗora shi a bango da sauransu don zaɓuɓɓuka tare da kayan haɗin shigarwa masu dacewa. Abokin ciniki zai iya zaɓar gwargwadon buƙatunsa.

12. Jagorar Shigarwa

Kayan Dakatarwa:

Kayan da aka dakatar da shi don allon LED yana ba da damar dakatar da bangarori don yin kyan gani ko kuma inda babu rufin grid na gargajiya na T-bar.

Abubuwan da aka haɗa a cikin Kayan Dutsen da aka Dakatar:

Abubuwa	PL-SCK4				PL-SCK6
	3030	3060	6060	6262	3012	6012
	X 2				X 3
	X 2				X 3
	X 2				X 3
	X 2				X 3
	X 4				X 6

Kit ɗin Sanya Tsarin Sama:

Wannan firam ɗin da aka ɗora a saman bene ya dace don shigar da fitilun panel na Lightman LED a wurare marasa layin rufin da aka dakatar, kamar allon plasterboard ko rufin siminti. Ya dace da ofisoshi, makarantu, asibitoci da sauransu inda ba zai yiwu a ɗora katako a cikin ɗaki ba.

Da farko a haɗa ɓangarorin firam guda uku a kan rufin. Sannan a saka allon LED a ciki. A ƙarshe a kammala shigarwa ta hanyar murƙushe sauran ɓangaren.

Tsarin saman yana da zurfin da zai iya ɗaukar direban LED, wanda ya kamata a sanya shi a tsakiyar allon don samun kyakkyawan watsawar zafi.

Abubuwan da aka haɗa a cikin Kit ɗin Tsarin Dutsen Surface:

Abubuwa	PL-SMK3030	PL-SMK6030	PL-SMK6060	PL-SMK6262	PL-SMK1230	PL-SMK1260
Girman Firam	302x305x50 mm	302x605x50 mm	602x605x50 mm	622x625x50mm	1202x305x50mm	1202x605x50mm
Firam A	L302 mm Kwamfuta 2 X	L302mm Kwamfuta 2 X	L602 mm Kwamfuta 2 X	L622mm Kwamfuta 2 X	L1202mm Kwamfuta 2 X	L1202 mm Kwamfuta 2 X
Tsarin B	L305 mm Kwamfuta 2 X	L305 mm Kwamfuta 2 X	L605mm Kwamfuta 2 X	L625 mm Kwamfuta 2 X	L305mm Kwamfuta 2 X	L605mm Kwamfuta 2 X
	Kwamfutoci 8 X
	X guda 4			Kwamfutoci 6 X

Kit ɗin Sanya Rufi:

An tsara kayan ɗaura rufin musamman, wata hanyar kuma ita ce a sanya fitilun panel na SGSLight TLP na LED a wurare marasa layin rufin da aka dakatar, kamar allon plasterboard ko rufin siminti ko bango. Ya dace da ofisoshi, makarantu, asibitoci da sauransu inda ba zai yiwu a ɗora rufin ba.

Da farko a haɗa maƙullan a kan silin/bango, sannan a haɗa maƙullan a kan allon LED. A ƙarshe a kammala shigarwa ta hanyar sanya direban LED a bayan allon LED.

Abubuwan da aka haɗa a cikin Kit ɗin Dutsen Rufi:

Abubuwa	PL-SMC4				PL-SMC6
	3030	3060	6060	6262	3012	6012
	X 4				X 6
	X 4				X 6
	X 4				X 6
	X 4				X 6
	X 4				X 6
	X 4				X 6
	X 4				X 6

Shirye-shiryen bazara:

Ana amfani da maƙullan maɓuɓɓugar ruwa don sanya allon LED a cikin rufin plasterboard mai ramin da aka yanke. Ya dace da ofisoshi, makarantu, asibitoci da sauransu inda ba zai yiwu a saka shi a cikin ɗaki ba.

Da farko a haɗa maƙallan maɓuɓɓugar ruwa zuwa allon LED. Sannan a saka allon LED a cikin ramin da aka yanke a rufin. A ƙarshe a kammala shigarwa ta hanyar daidaita matsayin allon LED ɗin kuma a tabbatar da cewa shigarwar ta yi ƙarfi kuma ta yi aminci.

Abubuwan da aka haɗa: