Fitilar LED mai siffar RGBW mai siffar 6000K 60W da aka ɗora a samanta 120x60 Hoton da aka nuna

Fitila mai haske ta RGBW LED Panel mai girman 6000K 60W 120x60

Na'urar Lightman LED panel wacce ke da canjin launi na RGBW. Ana iya sarrafa wannan daga wayar hannu ta hanyar Wi-Fi da kuma na'urar sarrafawa ta nesa ta zaɓi. Tare da zaɓuɓɓukan girma iri-iri, wannan yana sa wannan RGBW LED Panel ya kasance don kowane shigarwa. RGBW Panel yana amfani da guntu mai fitarwa mai yawa na Epistar 5050 kuma yana zuwa da garanti na shekaru 3.

Abu:Hasken Panel na LED na RGBW 600x1200

Ƙarfi:54W

Wutar Lantarki Mai Aiki:DC24V

Mai rage nauyi:Mai Rage Rage RGBW

Tsawon rayuwa:≥Awanni 50000

Aika mana imel Sauke shi azaman PDF

Nau'ikan samfura

Cikakken Bayani game da Samfurin

Jagorar Shigarwa

Shari'ar Aiki

Bidiyon Samfuri

1.Gabatarwar SamfurinHasken Faifan LED na RGBW 595x1195mm 54w.

• Na'urar LED mai amfani da Epistar SMD5050 LED a matsayin tushen haske, tana canza launi ta hanyar na'urar sarrafawa ta nesa mara waya ta 2.4G guda ɗaya, launin kyau.

• Hasken Panel na LED yana da inganci mai kyau, daidaitacce, daidaito, haske mai ƙarancin inuwa, tanadin kuzari 85% wanda ke nufin rage CO2 85%. Hasken panel na RGBW mai haske 54W tare da tsarin kariya na kai a ciki, wanda ke tabbatar da aiki na yau da kullun idan akwai rashin ƙarfi na wutar lantarki.

• Hasken LED Panel tare da Farantin Jagorar Hasken gani wanda aka yi da polycarbonate mai ƙarfin haske wanda aka tsara musamman don tabbatar da ingantaccen amfani da haske da daidaito. Kuma firam ɗin hasken rufi na LED wanda aka yi da ƙarfe mai inganci na aluminum. An tsara tsarin sosai don rage zafi.

• IP20, IP44, IP65 don zaɓuɓɓuka. Garanti na Ra>80, shekaru 3

2. Sigar Samfura:

Lambar Samfura	PL-60120-60W-RGBW	PL-3060-20W-RGBW	PL-3030-20W-RGBW
Amfani da Wutar Lantarki	54W	20W	20W
Girma (mm)	595119511mm	29559511mm	29529511mm
Yawan LED (inji)	Guda 210	Guda 91	Guda 91
Nau'in LED	SMD5050
Launi	RGB + Fari Launi
Kusurwar haske (digiri)	>120°
CRI	>80
Direban LED	Direban LED mai ƙarfin lantarki mai ɗorewa
Wutar Lantarki ta Fitarwa	DC24V
Voltage na Shigarwa	AC 85V - 265V, 50 - 60Hz
Muhalli na Aiki	Cikin Gida
Kayan Jiki	Firam ɗin ƙarfe na aluminum da PMMA
Matsayin IP	IP20
Zafin Aiki	-25°~70°
Hanya Mai Rage ...	RGB Mai Rage Haske + Fari Mai Rage Haske
Zaɓin Shigarwa	An saka saman/An dakatar/An saka shi a ciki
Tsawon rayuwa	awanni 50,000
Garanti	Shekaru 3

Hotunan Hasken Panel na LED:

2. Hasken panel na RGB LED mai ƙarfin 48w

3. Hasken faifan leda mai faɗi na 600x1200 rgb

Mai Kula da RGBW na Infrared 2.4G da kuma Nesa:

Mai sarrafa hasken panel RGBW -2.4GHz Mi-haske Mai sarrafa RGBW

• Tsarin sarrafawa mai sauƙin amfani

• Yi amfani da tsarin sarrafawa na 2.4G Hz RGBW, ikon hana tsangwama

• Ba tare da tsangwama tsakanin masu sarrafawa ba

• Yana iya daidaita haske da launuka a lokaci guda

• Nau'ikan nau'ikan yanayin walƙiya iri-iri guda 20 da ake da su

• Nisa tsakanin na'urorin sarrafawa ta mara waya zai iya kaiwa mita 25-30

• Faifan taɓawa daga nesa na Mai Kula da RF mara waya don RGBW

6. Mai Kula da RGBW na Infrared da kuma Na'urar Nesa

7. Mai Kula da Mara waya da Na'urar Nesa ta RGBW

6. Zane-zanen Wayoyin Wutar Lantarki na DC24V RGB LED

4. Aikace-aikacen Hasken Panel na LED:

Ana amfani da hasken rufi na LED a otal-otal, ɗakin taro, masana'antu, ofisoshi, gidaje, cibiyoyi, makarantu, asibitoci, rumbun ajiya, babban kanti, gine-ginen cibiyoyi, da hasken gidaje.

Na baya: Hasken Rufin Rufi na LED mai sassauƙa 48w RGBW 62x62cm

Na gaba: Hasken Rufin Faɗin LED Mai Zafi Mai Zafi 300×1200 120×30 Baƙi

Jagorar Shigarwa:

Ga hasken panel ɗin LED, akwai hanyoyin shigarwa na rufin da aka rufe, an ɗora saman, an ɗora shi a bango da sauransu don zaɓuɓɓuka tare da kayan haɗin shigarwa masu dacewa. Abokin ciniki zai iya zaɓar gwargwadon buƙatunsa.

Kayan Dakatarwa:

Kayan da aka dakatar da shi don allon LED yana ba da damar dakatar da bangarori don yin kyan gani ko kuma inda babu rufin grid na gargajiya na T-bar.

Abubuwan da aka haɗa a cikin Kayan Dutsen da aka Dakatar:

Abubuwa	PL-SCK4				PL-SCK6
	3030	3060	6060	6262	3012	6012
	X 2				X 3
	X 2				X 3
	X 2				X 3
	X 2				X 3
	X 4				X 6

Kit ɗin Sanya Tsarin Sama:

Wannan firam ɗin da aka ɗora a saman bene ya dace don shigar da fitilun panel na Lightman LED a wurare marasa layin rufin da aka dakatar, kamar allon plasterboard ko rufin siminti. Ya dace da ofisoshi, makarantu, asibitoci da sauransu inda ba zai yiwu a ɗora katako a cikin ɗaki ba.

Da farko a haɗa ɓangarorin firam guda uku a kan rufin. Sannan a saka allon LED a ciki. A ƙarshe a kammala shigarwa ta hanyar murƙushe sauran ɓangaren.

Tsarin saman yana da zurfin da zai iya ɗaukar direban LED, wanda ya kamata a sanya shi a tsakiyar allon don samun kyakkyawan watsawar zafi.

Abubuwan da aka haɗa a cikin Kit ɗin Tsarin Dutsen Surface:

Abubuwa	PL-SMK3030	PL-SMK6030	PL-SMK6060	PL-SMK6262	PL-SMK1230	PL-SMK1260
Girman Firam	302x305x50 mm	302x605x50 mm	602x605x50 mm	622x625x50mm	1202x305x50mm	1202x605x50mm
Firam A	L302 mm Kwamfuta 2 X	L302mm Kwamfuta 2 X	L602 mm Kwamfuta 2 X	L622mm Kwamfuta 2 X	L1202mm Kwamfuta 2 X	L1202 mm Kwamfuta 2 X
Tsarin B	L305 mm Kwamfuta 2 X	L305 mm Kwamfuta 2 X	L605mm Kwamfuta 2 X	L625 mm Kwamfuta 2 X	L305mm Kwamfuta 2 X	L605mm Kwamfuta 2 X
	Kwamfutoci 8 X
	X guda 4			Kwamfutoci 6 X

Kit ɗin Sanya Rufi:

An tsara kayan ɗaura rufin musamman, wata hanyar kuma ita ce a sanya fitilun panel na SGSLight TLP na LED a wurare marasa layin rufin da aka dakatar, kamar allon plasterboard ko rufin siminti ko bango. Ya dace da ofisoshi, makarantu, asibitoci da sauransu inda ba zai yiwu a ɗora rufin ba.

Da farko a haɗa maƙullan a kan silin/bango, sannan a haɗa maƙullan a kan allon LED. A ƙarshe a kammala shigarwa ta hanyar sanya direban LED a bayan allon LED.

Abubuwan da aka haɗa a cikin Kit ɗin Dutsen Rufi:

Abubuwa	PL-SMC4				PL-SMC6
	3030	3060	6060	6262	3012	6012
	X 4				X 6
	X 4				X 6
	X 4				X 6
	X 4				X 6
	X 4				X 6
	X 4				X 6
	X 4				X 6

Shirye-shiryen bazara:

Ana amfani da maƙullan maɓuɓɓugar ruwa don sanya allon LED a cikin rufin plasterboard mai ramin da aka yanke. Ya dace da ofisoshi, makarantu, asibitoci da sauransu inda ba zai yiwu a saka shi a cikin ɗaki ba.

Da farko a haɗa maƙallan maɓuɓɓugar ruwa zuwa allon LED. Sannan a saka allon LED a cikin ramin da aka yanke a rufin. A ƙarshe a kammala shigarwa ta hanyar daidaita matsayin allon LED ɗin kuma a tabbatar da cewa shigarwar ta yi ƙarfi kuma ta yi aminci.

Abubuwan da aka haɗa: