2700K-6500K Zafin Launi Mai Canzawa LED Slim Light Panel 6060

CCT dimmable yana amfani da mafita mai ɗorewa ta wutar lantarki don daidaita 'Launi' na hasken fari daga 3000K zuwa 6500K kuma a halin yanzu tare da aikin rage haske. Yana iya aiki a lokaci guda tare da kowane adadin sauran bangarorin haske tare da sarrafa nesa na RF guda ɗaya kawai, da kuma iyaka mai tasiri har zuwa mita 20. Daidaitawa ba tare da matakai 4 ba tare da walƙiya cikin sauri ba.

Abu:Hasken Faifan LED Mai Rage Haske 600x600 CCT

Ƙarfi:40W /48W /60W

Mai rage nauyi:CCT Mai Daidaitawa da Haske Mai Rage Haske

Zafin Launi:Ana iya daidaita shi daga 3000K zuwa 6500K

Tsawon rayuwa:≥Awanni 50000

Aika mana imel Sauke shi azaman PDF

Nau'ikan samfura

Cikakken Bayani game da Samfurin

Shigarwa Gui

Shari'ar Aiki

Bidiyon samfurin

1. SamfuriSiffofiof600x600 CCT Mai Rage HaskeLEDPanelHasket.

•Lightman 3000K-6500K fitilar panel mai launi mai haske (CCT panel light) fitila ce mai aiki da yawa ta LED, sarrafawa daga nesa, daidaita launi, fitilun sarrafa zafin jiki da tsarin fitilun.

An daidaita samfurin kayan aikin tare da na'urar sarrafawa ta nesa mara waya, na'urar sarrafawa mai karɓa da kuma fitilar LED. Tsarin sarrafawa ta nesa mai siriri sosai, ba tare da haske ba, mai sarrafa nau'in maɓalli mai kyau, yana haskaka na'urar sarrafawa ta nesa mara waya mai mita 2.4G mai daraja, tare da ƙarancin amfani da wutar lantarki, nisan watsawa mai tsawo, ikon hana tsangwama, da saurin sadarwa ta iska.

Na'urar sarrafawa ta nesa tana da kyau kuma tana da kyau a kamanni, mai sauƙi kuma mai amfani a aiki. Tare da rage haske, zafin launi, da kuma sarrafa daidaitawar fakiti.

• Ingancin haske mai yawa tare da maganin wutar lantarki mai ɗorewa, Babban PF, Ƙananan HTD.

• Mai sarrafa RF-2.4G mara waya, nisan mai sarrafawa zai iya kaiwa mita 20, Ƙarfin ikon hana tsangwama.

• Hasken rufin da aka yi wa jagora a kan hasken Lightman yana da takaddun shaida na CE ROHS, FCC, SAA, TUV, UL DLC da sauransu.

2. Bayanin Samfuri:

Lambar Samfura	PL-6060-40W-CCT	PL-6262-40W-CCT	PL-3060-36W-CCT
Amfani da Wutar Lantarki	40W/48W/60W	40W	36W
Girma (mm)	59559510mm	62062010mm	59529510mm
Nau'in LED	SMD 2835
Zafin Launi (K)	Mai rage gudu daga 3000K zuwa 6500K
Launi	Fari Mai Dumi/Fari Na Halitta/Fari Mai Tsabta
Kusurwar haske (digiri)	>120°
Ingancin Haske (lm/w)	>90lm/w
CRI	>80
Direban LED	Direban IC na Yanzu Mai Dorewa
Ma'aunin Ƙarfi	>0.9
Voltage na Shigarwa	AC85-265V, 50/60HZ
Muhalli na Aiki	Cikin Gida
Kayan Jiki	Aluminum Frame + Mitsubishi LGP + PS Diffuser
Matsayin IP	IP20
Zafin Aiki	-20°~65°
Hanya Mai Rage ...	Zafin launi da haske mai rage haske
Zaɓin Shigarwa	Rufi Mai Rufi/ An Dakatar/ Fuskar Gida/ An Sanya a Bango
Tsawon rayuwa	awanni 50,000
Garanti	Shekaru 3

3.Hotunan Hasken LED Panel:

1. Hasken panel mai jagoranci na CCT 600x600

2. Hasken panel mai haske na CCT mai iya daidaitawa 60x60

Mai Kula da Mara waya ta CCT 2.4G:

1. Cikin daƙiƙa 3 bayan an kunna fitilar, danna maɓallin lamba "1", sannan danna maɓallin "ID", sannan sake danna maɓallin lamba "1" sannan sake danna maɓallin "ID" a matsayin karo na farko. Idan lambar ta yi daidai da kyau, to hasken zai yi walƙiya sau ɗaya;

2. Idan kana son saita fitilun rukuni na biyu ko na biyu, za ka iya danna maɓallin lamba "2", sannan ka danna maɓallin "ID", sannan ka sake danna maɓallin lamba "2" sannan ka sake danna maɓallin "ID" kamar haka. Wannan shine don saita lambar rukuni don fitilun panel masu dacewa;

3. Lokacin da kake son sarrafa lambar haske ko lambar haske ta rukuni "1", kawai danna maɓallin lamba "1" don daidaita haske ko zafin launi;

Mai Kula da Rage Ragewa na CCT da Aka Sanya a Bango:

Kunnawa/Kashewa, Rage Ragewa da Daidaita Zafin Launi. Ana iya shigar da wannan mai sarrafa panel a bango. Ana iya saita hasken panel na LED rukuni 6, kuma kowane rukuni ba shi da iyaka ga adadin hasken panel.

4. Mai sarrafa CCT da aka sanya a bango wanda za a iya rage haskensa

Firikwensin Hasken Yanayi:

Daidaita hasken fitilar ta atomatik bisa ga hasken da ke kewaye da ita. Sarrafa Rukunin 1, babu iyaka ga adadin fitilun da ke cikin rukunin a cikin nisan da ke tasiri. Aikin gano sauti na firikwensin zaɓi ne. Idan akwai sauti, firikwensin zai daidaita fitilar ko kuma zai kashe fitilar.

5. Na'urar Hasken Yanayi ta Lightman don Hasken Panel na Dimmalbe na CCT

6. Zafin Launi Mai Daidaita Hasken Panel na LED daga Lightman

4. Aikace-aikacen:

Hasken CCT LED Panel Lights ana amfani da shi sosai don hasken cikin gida. Kamar, Ofis, Asibiti, Mai Juriya, Babban Kasuwa, Otal da Kayan Abinci da sauransu.

Aikin Shigarwa Mai Rufewa:

Aikin Shigarwa da Aka Sanya a Sama:

Aikin Shigarwa da Aka Dakatar:

11. An dakatar da hasken leda mai leda 60x60 a ofis

Aikin Shigarwa da Aka Sanya a Bango:

Na baya: Farashin Jigilar Kaya 60x60cm IP65 Mai Rage Ruwa RGB LED Rufi Panel Haske 600×600 60W

Na gaba: Hasken Ofishin LED mai haske 40W 60×60 daga Masana'antar Shenzhen

Jagorar Shigarwa:

Ga hasken panel ɗin LED, akwai hanyoyin shigarwa na rufin da aka rufe, an ɗora saman, an ɗora shi a bango da sauransu don zaɓuɓɓuka tare da kayan haɗin shigarwa masu dacewa. Abokin ciniki zai iya zaɓar gwargwadon buƙatunsa.

Kayan Dakatarwa:

Kayan da aka dakatar da shi don allon LED yana ba da damar dakatar da bangarori don yin kyan gani ko kuma inda babu rufin grid na gargajiya na T-bar.

Abubuwan da aka haɗa a cikin Kayan Dutsen da aka Dakatar:

Abubuwa	PL-SCK4				PL-SCK6
	3030	3060	6060	6262	3012	6012
	X 2				X 3
	X 2				X 3
	X 2				X 3
	X 2				X 3
	X 4				X 6

Kit ɗin Sanya Tsarin Sama:

Wannan firam ɗin da aka ɗora a saman bene ya dace don shigar da fitilun panel na Lightman LED a wurare marasa layin rufin da aka dakatar, kamar allon plasterboard ko rufin siminti. Ya dace da ofisoshi, makarantu, asibitoci da sauransu inda ba zai yiwu a ɗora katako a cikin ɗaki ba.

Da farko a haɗa ɓangarorin firam guda uku a kan rufin. Sannan a saka allon LED a ciki. A ƙarshe a kammala shigarwa ta hanyar murƙushe sauran ɓangaren.

Tsarin saman yana da zurfin da zai iya ɗaukar direban LED, wanda ya kamata a sanya shi a tsakiyar allon don samun kyakkyawan watsawar zafi.

Abubuwan da aka haɗa a cikin Kit ɗin Tsarin Dutsen Surface:

Abubuwa	PL-SMK3030	PL-SMK6030	PL-SMK6060	PL-SMK6262	PL-SMK1230	PL-SMK1260
Girman Firam	302x305x50 mm	302x605x50 mm	602x605x50 mm	622x625x50mm	1202x305x50mm	1202x605x50mm
Firam A	L302 mm Kwamfuta 2 X	L302mm Kwamfuta 2 X	L602 mm Kwamfuta 2 X	L622mm Kwamfuta 2 X	L1202mm Kwamfuta 2 X	L1202 mm Kwamfuta 2 X
Tsarin B	L305 mm Kwamfuta 2 X	L305 mm Kwamfuta 2 X	L605mm Kwamfuta 2 X	L625 mm Kwamfuta 2 X	L305mm Kwamfuta 2 X	L605mm Kwamfuta 2 X
	Kwamfutoci 8 X
	X guda 4			Kwamfutoci 6 X

Kit ɗin Sanya Rufi:

An tsara kayan ɗaura rufin musamman, wata hanyar kuma ita ce a sanya fitilun panel na SGSLight TLP na LED a wurare marasa layin rufin da aka dakatar, kamar allon plasterboard ko rufin siminti ko bango. Ya dace da ofisoshi, makarantu, asibitoci da sauransu inda ba zai yiwu a ɗora rufin ba.

Da farko a haɗa maƙullan a kan silin/bango, sannan a haɗa maƙullan a kan allon LED. A ƙarshe a kammala shigarwa ta hanyar sanya direban LED a bayan allon LED.

Abubuwan da aka haɗa a cikin Kit ɗin Dutsen Rufi:

Abubuwa	PL-SMC4				PL-SMC6
	3030	3060	6060	6262	3012	6012
	X 4				X 6
	X 4				X 6
	X 4				X 6
	X 4				X 6
	X 4				X 6
	X 4				X 6
	X 4				X 6

Shirye-shiryen bazara:

Ana amfani da maƙullan maɓuɓɓugar ruwa don sanya allon LED a cikin rufin plasterboard mai ramin da aka yanke. Ya dace da ofisoshi, makarantu, asibitoci da sauransu inda ba zai yiwu a saka shi a cikin ɗaki ba.

Da farko a haɗa maƙallan maɓuɓɓugar ruwa zuwa allon LED. Sannan a saka allon LED a cikin ramin da aka yanke a rufin. A ƙarshe a kammala shigarwa ta hanyar daidaita matsayin allon LED ɗin kuma a tabbatar da cewa shigarwar ta yi ƙarfi kuma ta yi aminci.

Abubuwan da aka haɗa: