18W 20W 30×60 Batirin Gaggawa Mai Rufi Hasken Bangon LED Hotunan da aka Fito

18W 20W 30×60 Batirin Gaggawa Mai Rufi Hasken Faifan LED

Ga hasken rufi na LED, a lokacin adana kwararan fitila, muna bayar da wasu bangarorin LED, waɗanda ke zuwa da garantin masana'anta na shekaru 3 kuma an yi musu alama a cikin jerin samfuran. Duk bangarorin LED ɗinmu suna samuwa a cikin launin fari na halitta kuma suna da kauri 11mm. Ainihin allon da kansa fari ne wanda ba a iya gani a fili kuma shine abin da ya sa ya shahara a tsakanin yawancin masu zanen kaya. Ana iya siyan bangarorin LED ɗinmu tare da zaɓuɓɓukan kayan dakatarwa da kayan ɗora saman.

Abu:Fitilar LED ta Gaggawa 300x600

Ƙarfi:18W / 20W / 36W / 40W

Wutar Lantarki ta Shigarwa:AC85~265V, 50-60Hz

Zafin Launi:Fari Mai Dumi, Fari Mai Na Halitta, Fari Mai Sanyi

Tsawon rayuwa:≥Awanni 50000

Aika mana imel Sauke shi azaman PDF

Nau'ikan samfura

Cikakken Bayani game da Samfurin

Jagorar Shigarwa

Shari'ar Aiki

Bidiyon Samfuri

1.Gabatarwar SamfurinGaggawa ta 60x30LEDPanelHaske.

• Kayan aikin wutar lantarki na gaggawa wanda aka sanye shi da inverter, fakitin baturi da na'urar sarrafawa ta nesa. Tare da ciyarwa akai-akai, batura suna caji cikin awanni 24. Bayan haka, idan babban wutar ya lalace, batura suna kunna tare da walƙiya a cikin daƙiƙa 0.1. Ana iya tsara tsarin lokacin aiki na gaggawa na awanni 1/2/3 dangane da fakitin baturi daban-daban don biyan buƙatun a ƙarƙashin yanayi daban-daban. Ana amfani da shi don fitilar gaggawa, yana haskakawa ta atomatik lokacin da wuta ta mutu.

• Fitilar LED tana adana kuzari, tana da haske sosai, ba ta da mercury, ba ta walƙiya, ba ta da tasirin zafi, ba ta da gurɓatawa, ba ta da tsangwama daga rediyo. Tana iya adana sararin kayan ado.

Fitilar lantarki ta gaggawa tana amfani da ƙananan barbashi masu inganci da aka shigo da su daga Jamus, faranti ne da aka ƙera a Taiwan, suna da haske iri ɗaya a saman haske, hasken yana da laushi ba ya walƙiya, hasken yana da ƙarfi sosai, babu wutar lantarki mai ƙarfi, ba ya shan ƙura.

2. Sigar Samfura:

Lambar Samfura	PL-3060-18W	PL-3060-20W	PL-3060-36W	PL-3060-40W
Amfani da Wutar Lantarki	18W	20 W	36 W	40W
Hasken Haske (Lm)	1620～1710lm	1800～1900lm	3060～3420lm	3400-3600lm
Yawan LED (inji)	Guda 92	Guda 100	Guda 192	Kwamfuta 204
Nau'in LED	SMD 2835
Lokacin Gaggawa	Awa 1, Awa 2, Awa 3 don zaɓuɓɓuka
Zafin Launi (K)	3000-6500K
Launi	Fari Mai Dumi/Na Halitta/Mai Sanyi
Girma	29559511mm
Kusurwar haske (digiri)	>120°
Ingancin Haske (lm/w)	>85lm/w
CRI	>80
Ma'aunin Ƙarfi	>0.95
Voltage na Shigarwa	AC 85V - 265V
Mita Mai Sauri (Hz)	50 - 60Hz
Muhalli na Aiki	Cikin Gida
Kayan Jiki	Firam ɗin ƙarfe na aluminum da mai watsa PS
Matsayin IP	IP20
Zafin Aiki	-20°~65°
Mai iya ragewa	Zaɓi
Tsawon rayuwa	awanni 50,000
Garanti	Shekaru 3 ko Shekaru 5

Hotunan Hasken Panel na LED:

4. Haɗin Wayoyi na Gaggawa don hasken panel na LED

5. gwajin hasken lebur mai jagoranci na gaggawa

4. Aikace-aikacen Hasken Panel na LED:

Ana amfani da hasken Sky Panel LED mara Frameless sosai a ofisoshi, asibiti, ɗakin kwana, babban kanti, makarantu, masana'antu, wurin motsa jiki, otal, birnin anime da sauransu.

Aikin Shigarwa da Aka Sanya a Bango:

11. Hasken panel na ugr16 da aka sanya a bango

Aikin Shigarwa Mai Rufewa:

Aikin Shigarwa da Aka Dakatar:

10. Hasken allo na gaggawa na 40w 600x600

Aikin Shigarwa da Aka Sanya a Sama:

Na baya: IP44 Awa 1 Awa 2 Awa 2 Lokacin Gaggawa 295×295 Fitilar LED Mai Rage Haske Mai Sauƙi

Na gaba: 1200mmx300mm An Dakatar Sama Ƙasa Fitilar Hasken LED Mai Fitar da Gefe Biyu

Jagorar Shigarwa:

Ga hasken panel ɗin LED, akwai hanyoyin shigarwa na rufin da aka rufe, an ɗora saman, an ɗora shi a bango da sauransu don zaɓuɓɓuka tare da kayan haɗin shigarwa masu dacewa. Abokin ciniki zai iya zaɓar gwargwadon buƙatunsa.

12. Jagorar Shigarwa

Kayan Dakatarwa:

Kayan da aka dakatar da shi don allon LED yana ba da damar dakatar da bangarori don yin kyan gani ko kuma inda babu rufin grid na gargajiya na T-bar.

Abubuwan da aka haɗa a cikin Kayan Dutsen da aka Dakatar:

Abubuwa	PL-SCK4				PL-SCK6
	3030	3060	6060	6262	3012	6012
	X 2				X 3
	X 2				X 3
	X 2				X 3
	X 2				X 3
	X 4				X 6

Kit ɗin Sanya Tsarin Sama:

Wannan firam ɗin da aka ɗora a saman bene ya dace don shigar da fitilun panel na Lightman LED a wurare marasa layin rufin da aka dakatar, kamar allon plasterboard ko rufin siminti. Ya dace da ofisoshi, makarantu, asibitoci da sauransu inda ba zai yiwu a ɗora katako a cikin ɗaki ba.

Da farko a haɗa ɓangarorin firam guda uku a kan rufin. Sannan a saka allon LED a ciki. A ƙarshe a kammala shigarwa ta hanyar murƙushe sauran ɓangaren.

Tsarin saman yana da zurfin da zai iya ɗaukar direban LED, wanda ya kamata a sanya shi a tsakiyar allon don samun kyakkyawan watsawar zafi.

Abubuwan da aka haɗa a cikin Kit ɗin Tsarin Dutsen Surface:

Abubuwa	PL-SMK3030	PL-SMK6030	PL-SMK6060	PL-SMK6262	PL-SMK1230	PL-SMK1260
Girman Firam	302x305x50 mm	302x605x50 mm	602x605x50 mm	622x625x50mm	1202x305x50mm	1202x605x50mm
Firam A	L302 mm Kwamfuta 2 X	L302mm Kwamfuta 2 X	L602 mm Kwamfuta 2 X	L622mm Kwamfuta 2 X	L1202mm Kwamfuta 2 X	L1202 mm Kwamfuta 2 X
Tsarin B	L305 mm Kwamfuta 2 X	L305 mm Kwamfuta 2 X	L605mm Kwamfuta 2 X	L625 mm Kwamfuta 2 X	L305mm Kwamfuta 2 X	L605mm Kwamfuta 2 X
	Kwamfutoci 8 X
	X guda 4			Kwamfutoci 6 X

Kit ɗin Sanya Rufi:

An tsara kayan ɗaura rufin musamman, wata hanyar kuma ita ce a sanya fitilun panel na SGSLight TLP na LED a wurare marasa layin rufin da aka dakatar, kamar allon plasterboard ko rufin siminti ko bango. Ya dace da ofisoshi, makarantu, asibitoci da sauransu inda ba zai yiwu a ɗora rufin ba.

Da farko a haɗa maƙullan a kan silin/bango, sannan a haɗa maƙullan a kan allon LED. A ƙarshe a kammala shigarwa ta hanyar sanya direban LED a bayan allon LED.

Abubuwan da aka haɗa a cikin Kit ɗin Dutsen Rufi:

Abubuwa	PL-SMC4				PL-SMC6
	3030	3060	6060	6262	3012	6012
	X 4				X 6
	X 4				X 6
	X 4				X 6
	X 4				X 6
	X 4				X 6
	X 4				X 6
	X 4				X 6

Shirye-shiryen bazara:

Ana amfani da maƙullan maɓuɓɓugar ruwa don sanya allon LED a cikin rufin plasterboard mai ramin da aka yanke. Ya dace da ofisoshi, makarantu, asibitoci da sauransu inda ba zai yiwu a saka shi a cikin ɗaki ba.

Da farko a haɗa maƙallan maɓuɓɓugar ruwa zuwa allon LED. Sannan a saka allon LED a cikin ramin da aka yanke a rufin. A ƙarshe a kammala shigarwa ta hanyar daidaita matsayin allon LED ɗin kuma a tabbatar da cewa shigarwar ta yi ƙarfi kuma ta yi aminci.

Abubuwan da aka haɗa: