Nau'ikan samfura
-
Hasken Dakin Girki 18W 30×30 Mai Rufe Wutar Lantarki...
-
Hasken LED mai faɗi 300 × 300 wanda aka ɗora a saman 20W...
1. Siffofin Samfurin naHasken Faifan LED 300x300 12W.
• Jikin aluminum gami 6063 da kuma na'urar watsa haske ta PS mai haskakawa.
• Tsarin da'ira na musamman, kowace LED za ta iya aiki daban, don haka za a iya guje mata tasirin lalacewar LED.
• Faifan rufi na LED sun ɗauki SMD2835 Epistar Chip a matsayin Tushen Haske, Ingantaccen Haske 90lm/w.
• Faifan hasken rufi na LED yana amfani da takarda mai haske mai inganci, ƙimar haske sama da kashi 98%, kuma yana da daidaiton haske.
• Eva tana da sassauci mai kyau, tana da kyakkyawan daidaiton sinadarai, tana iya kare fitila sosai.
• Babu jinkiri a lokacin farawa, babu buƙatar lokacin dumama, babu hayaniya, babu walƙiya; Babu hasken UV ko IR a cikin hasken, babu mercury, babu gubar.
2. Bayanin Samfuri:
| Lambar Samfura | PL-3030-12W | PL-3030-18W | PL-3030-20W |
| Amfani da Wutar Lantarki | 12 W | 18 W | 20 W |
| Hasken Haske (Lm) | 960～1080lm | 1440~1620lm | 1600~1800lm |
| Nau'in LED | SMD 2835 | ||
| Zafin Launi (K) | 2800 - 6500K | ||
| Launi | Fari Mai Dumi/Na Halitta/Mai Sanyi | ||
| Girma | 295x295x10mm | ||
| Kusurwar haske (digiri) | >120° | ||
| Ingancin Haske (lm/w) | >80lm/w | ||
| CRI | >80 | ||
| Ma'aunin Ƙarfi | >0.95 | ||
| Voltage na Shigarwa | AC 85V - 265V | ||
| Mita Mai Sauri (Hz) | 50 - 60Hz | ||
| Muhalli na Aiki | Cikin Gida | ||
| Kayan Jiki | Firam ɗin ƙarfe na aluminum da mai watsa PS | ||
| Matsayin IP | IP20 | ||
| Zafin Aiki | -20°~65° | ||
| Mai iya ragewa | Zaɓi | ||
| Tsawon rayuwa | awanni 50,000 | ||
| Garanti | Shekaru 3 ko Shekaru 5 | ||
3. Hotunan Hasken Panel na LED:
4. Aikace-aikacen Hasken Panel na LED:
Ana iya amfani da hasken LED mai faɗi a gidaje, makarantu, manyan kantuna, otal-otal, ɗakunan taro, masana'antu da ofisoshi da sauransu.
Aikin Shigarwa Mai Rufewa:
Aikin Shigarwa da Aka Sanya a Sama:
Aikin Shigarwa da Aka Dakatar:
Aikin Shigarwa da Aka Sanya a Bango:
Ga hasken panel ɗin LED, akwai hanyoyin shigarwa na rufin da aka rufe, an ɗora saman, an ɗora shi a bango da sauransu don zaɓuɓɓuka tare da kayan haɗin shigarwa masu dacewa. Abokin ciniki zai iya zaɓar gwargwadon buƙatunsa. 
Kayan Dakatarwa:
Kayan da aka dakatar da shi don allon LED yana ba da damar dakatar da bangarori don yin kyan gani ko kuma inda babu rufin grid na gargajiya na T-bar.
Abubuwan da aka haɗa a cikin Kayan Dutsen da aka Dakatar:
| Abubuwa | PL-SCK4 | PL-SCK6 | ||||
| 3030 | 3060 | 6060 | 6262 | 3012 | 6012 | |
 | X 2 | X 3 | ||||
 | X 2 | X 3 | ||||
 | X 2 | X 3 | ||||
 | X 2 | X 3 | ||||
 | X 4 | X 6 | ||||
Kit ɗin Sanya Tsarin Sama:
Wannan firam ɗin da aka ɗora a saman bene ya dace don shigar da fitilun panel na Lightman LED a wurare marasa layin rufin da aka dakatar, kamar allon plasterboard ko rufin siminti. Ya dace da ofisoshi, makarantu, asibitoci da sauransu inda ba zai yiwu a ɗora katako a cikin ɗaki ba.
Da farko a haɗa ɓangarorin firam guda uku a kan rufin. Sannan a saka allon LED a ciki. A ƙarshe a kammala shigarwa ta hanyar murƙushe sauran ɓangaren.
Tsarin saman yana da zurfin da zai iya ɗaukar direban LED, wanda ya kamata a sanya shi a tsakiyar allon don samun kyakkyawan watsawar zafi.
Abubuwan da aka haɗa a cikin Kit ɗin Tsarin Dutsen Surface:
| Abubuwa | PL-SMK3030 | PL-SMK6030 | PL-SMK6060 | PL-SMK6262 | PL-SMK1230 | PL-SMK1260 | |
| Girman Firam | 302x305x50 mm | 302x605x50 mm | 602x605x50 mm | 622x625x50mm | 1202x305x50mm | 1202x605x50mm | |
|
Firam A | L302 mm Kwamfuta 2 X | L302mm Kwamfuta 2 X | L602 mm Kwamfuta 2 X | L622mm Kwamfuta 2 X | L1202mm Kwamfuta 2 X | L1202 mm Kwamfuta 2 X | |
|
Tsarin B | L305 mm Kwamfuta 2 X | L305 mm Kwamfuta 2 X | L605mm Kwamfuta 2 X | L625 mm Kwamfuta 2 X | L305mm Kwamfuta 2 X | L605mm Kwamfuta 2 X | |
 | Kwamfutoci 8 X | ||||||
 | X guda 4 | Kwamfutoci 6 X | |||||
Kit ɗin Sanya Rufi:
An tsara kayan ɗaura rufin musamman, wata hanyar kuma ita ce a sanya fitilun panel na SGSLight TLP na LED a wurare marasa layin rufin da aka dakatar, kamar allon plasterboard ko rufin siminti ko bango. Ya dace da ofisoshi, makarantu, asibitoci da sauransu inda ba zai yiwu a ɗora rufin ba.
Da farko a haɗa maƙullan a kan silin/bango, sannan a haɗa maƙullan a kan allon LED. A ƙarshe a kammala shigarwa ta hanyar sanya direban LED a bayan allon LED.
Abubuwan da aka haɗa a cikin Kit ɗin Dutsen Rufi:
| Abubuwa | PL-SMC4 | PL-SMC6 | ||||
| 3030 | 3060 | 6060 | 6262 | 3012 | 6012 | |
 | X 4 | X 6 | ||||
 | X 4 | X 6 | ||||
 | X 4 | X 6 | ||||
 | X 4 | X 6 | ||||
 | X 4 | X 6 | ||||
 | X 4 | X 6 | ||||
 | X 4 | X 6 | ||||
Shirye-shiryen bazara:
Ana amfani da maƙullan maɓuɓɓugar ruwa don sanya allon LED a cikin rufin plasterboard mai ramin da aka yanke. Ya dace da ofisoshi, makarantu, asibitoci da sauransu inda ba zai yiwu a saka shi a cikin ɗaki ba.
Da farko a haɗa maƙallan maɓuɓɓugar ruwa zuwa allon LED. Sannan a saka allon LED a cikin ramin da aka yanke a rufin. A ƙarshe a kammala shigarwa ta hanyar daidaita matsayin allon LED ɗin kuma a tabbatar da cewa shigarwar ta yi ƙarfi kuma ta yi aminci.
Abubuwan da aka haɗa:
| Abubuwa | PL-RSC4 | PL-RSC6 | ||||
| 3030 | 3060 | 6060 | 6262 | 3012 | 6012 | |
 | X 4 | X 6 | ||||
 | X 4 | X 6 | ||||
Hasken Dakin Jiki (China)
Hasken Haikali (China)
Hasken Tashar Talabijin (Isra'ila)
Hasken Ofis (Birtaniya)
